Hydrostatic Pressure Test Equipment
Home > Products > Liquid Pressure Pump > Hydraulic Test Pump > Hydrostatic Pressure Test Equipment
SUNCENTER- Hydrostatic pressure test pump are compact and delicacy solution tailored to customer specific requirements with air driven liquid pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.
Product Description
Hydrostatic pressure testing is a common method used to test the integrity and strength of pipelines, vessels, and other pressure equipment. Hydrostatic pressure test equipment is used to conduct these tests, and typically includes the following features:
High Pressure Capability: Hydrostatic pressure test equipment is designed to withstand high pressures, often up to several thousand psi. This allows it to simulate the operating conditions that the equipment will be subjected to in its actual use.
Accurate Pressure Measurement: The equipment is designed to accurately measure the pressure of the fluid being used to test the equipment. This is important to ensure that the equipment being tested is not subjected to pressures beyond its design limits.
Safety Features: Hydrostatic pressure test equipment typically includes safety features such as relief valves and pressure gauges to ensure safe operation and prevent over-pressurization.
Easy to Use: The equipment is designed to be easy to set up and operate, with clear instructions and controls for the operator.
Portable: Hydrostatic pressure test equipment is often portable, allowing it to be taken to the location where the equipment being tested is located. This is important in situations where it is not practical to move the equipment being tested.
Data Recording: Modern hydrostatic pressure test equipment often includes data recording features, allowing the pressure and other test parameters to be recorded and analyzed later. This can be useful for identifying potential issues and for complying with regulatory requirements.
With a large stock of quality high pressure hydrostatic test equipment, we can ensure we have the system you need.Hydrostatic Pressure Test Equipment is safe and easy to operate and is suitable for a wide range of liquids and gases. In addition to our standard equipment, we can also design and manufacture bespoke hydrostatic testing systems to your specifications. Pneumatics and Hydraulics is a stocking distributor of all the components in our systems, enabling us to build a cost effective, reliable system that is fully customised to your needs.
Any of our high pressure test systems are supplied with a variety of safety devices to ensure maximum safety for all your operators. Pneumatics and Hydraulics' experienced engineering team can also provide on-site consultation and start-up services if you require.
MOQ: 1 Set
Brand Name: SUNCENTER
Certificate: ISO/CE/SGS
Warranty: 13 Months
Packaging: by Plywood case
Shipping Port: Shenzhen/Hongkong
Payment: T/T, Western Union, Credit card.
Transaction method: EXW, FOB, DDP, CIF, CFR
Place of Origin: Guangdong Province, China (Mainland)
Delivery Time: Within 10-15 working days after received deposit.
SUNCENTER- Hydrostatic pressure test pump are compact and delicacy solution tailored to customer specific requirements with air driven liquid pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.
To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. SUNCENTER Hydraulic power packs are available with wide range of pressure ratios make these series of pumps ideal for powering a variety of oil/hydraulic operations. The maximum operating pressure up to 640 MPa.
As the pressure will be generated by means of a pneumatically operated pump,the electric connection will not be necessary. To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter and water separator, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.
The desired operating pressure can be attained by adjusting the driving air pressure. When the driving air pressure and the output pressure reach the balance, the pump stops filling pressure and the output pressure stays at the preset value. This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other functions requiring a determined pressure.
Air –driven liquid booster pump,round chart recorder
Stainless steel material cabinet
F.R.L combination for driven air (adjusts air pressure, add lubricating oil and filter)
Driven air switch (Pump starting switch), driven air pressure gauge, water tank
Liquid inlet/outlet switch, high pressure liquid guage, unloading valve, interconnecting pipes etc.
And we could also customize it according to clients' special requirement.
DLS series Hydrostatic pressure test pump with paper round chart recorder
Model |
Pressure Ratio |
Driven air pressure PL |
Formula to calculate outlet pressure |
MAX Outlet Pressure(bar)* |
Driven air inlet port
|
High pressure Outlet port |
MAX Flow (L/min)** |
DLS-DGGD4 |
4:1 |
3-8 bar |
4XPL |
32 |
G 1/2 |
NPT/ZG |
70.0 |
DLS-DGG6 |
6:1 |
3-8 bar |
6XPL |
48 |
G 1/2 |
NPT/ZG |
29.91 |
DLS-DGG10 |
10:1 |
3-8 bar |
10XPL |
80 |
G 1/2 |
NPT/ZG |
18.84 |
DLS-DGG16 |
16:1 |
3-8 bar |
16XPL |
128 |
G 1/2 |
NPT/ZG |
12.42 |
DLS-DGG28 |
28:1 |
3-8 bar |
28XPL |
224 |
G 1/2 |
NPT/ZG |
7.11 |
DLS-DGG40 |
40:1 |
3-8 bar |
40XPL |
320 |
G 1/2 |
NPT/ZG |
4.89 |
DLS-DGG64 |
64:1 |
3-8 bar |
64XPL |
512 |
G 1/2 |
NPT/ZG |
3.08 |
DLS-DGG80 |
80:1 |
3-8 bar |
80XPL |
640 |
G 1/2 |
NPT/ZG |
2.44 |
DLS-DGG100 |
100:1 |
3-8 bar |
100XPL |
800 |
G 1/2 |
NPT/ZG |
1.92 |
DLS-DGG130 |
130:1 |
3-8 bar |
130XPL |
1040 |
G 1/2 |
NPT/ZG |
1.47 |
DLS-DGG175 |
175:1 |
3-8 bar |
175XPL |
1400 |
G 1/2 |
NPT/ZG |
1.14 |
DLS-DGG255 |
255:1 |
3-8 bar |
255XPL |
2040 |
G 1/2 |
NPT/ZG |
0.75 |
DLS-DGG400 |
400:1 |
3-8 bar |
400XPL |
3200 |
G 1/2 |
NPT/ZG |
0.48 |
DLS-DGG510 |
510:1 |
3-8 bar |
510XPL |
4080 |
G 1/2 |
NPT/ZG |
0.65 |
DLS-DGG800 |
800:1 |
3-8 bar |
800XPL |
6400 |
G 1/2 |
NPT/ZG |
0.42 |
We could offer you manual control/Computer control model pressure test machine.
Pressure range from 10 bar to 6000 bar.
And test medium could be: air / gas / water / hydraulic oil
Test items could be: hose / tube / pipe / valve / sensor / cylinder / guage etc.
In order to choose suitable booster pump or systems for you,
please kindly reply us the following questions:
1. What is the item(product) do you need to test?
2. Do you want to do air pressure testing or hydraulic pressure test?
3. What is the pressure test range do you need?